Driver_irql_not_less_or_equal, 0x000000d1 - ISCSI initiator

You could receive a stop 0x000000D1, that is to say error Driver_irql_Not_less_or_Equal after activating a Summary setting of the ISCSI initiator which uses the CRC or which uses the sum of control.

Driver_irql_not_less_or_equal bsod - ISCSI initiator

This can happen because the ISCSI initiator incorrectly processes the sensor data from a device after receiving a non -fatal verification condition when the inscription of the SSMS summary is activated.This problem generally occurs when band peripherals or other SCSI not fixed disperes are used.

If you encounter this problem in Windows 11/10 you can try these suggestions:

1. Exécutez le vérificateur de fichiers système
2. Mettre à jour les pilotes de périphérique
3. Utilisez l’option de réinitialisation du cloud
4. Réparer l’image système à l’aide de l’outil DISM
5. Réparer l’installation de Windows à l’aide du support d’installation
6. Voir ce post pour des suggestions supplémentaires pour corriger l’erreur 0x000000D1.

Can you start in safe mode?If you can, it makes things easier.If you recently installed a driver or software, you can start Windows 11/10 in Safe mode and solve problems.If you have already activated the F8 key earlier, things are easier when you press F8 when starting, to enter safe mode.

Si vous ne pouvez pas entrer en mode sans échec, vous devrez peut-être démarrer Windows 11/10 avec votre Support d’installation de Windows ou Lecteur de récupération et sélectionnez Répare ton ordinateur pour entrer Dépannage > Options de démarrage avancées > Invite de commandes.You can now use CMD to run commands.You can use a Windows 11/10 DVD or a moving USB key, or you can engrave an ISO Windows 11/10 image on a USB key using another computer, then use it.

Similar shutdown errors that can help you are:

If you encounter this problem on Windows 7, to correct this problem, you can visit KB982674 and request a fix.

Apply this correction only to systems encountering the problem mentioned above.

All “0x000000D1” stop errors are not caused by this problem.